Spotting Scope Tripod

Benro Slim Carbon-Fibre Tripod with Ball Head TSL08CN00

Benro Slim Carbon-Fibre Tripod with Ball Head TSL08CN00

Benro Slim Carbon-Fibre Tripod with Ball Head TSL08CN00    Benro Slim Carbon-Fibre Tripod with Ball Head TSL08CN00
Benro Slim Carbon-Fibre Tripod with Ball Head - TSL08CN00. This TSL08CN00 Slim Tripod from Benro is constructed from carbon fibre to minimize weight, supports up to 4kg, and includes an Arca-type ball head with quick release plate. Designed to conserve space during storage and transport, the tripod measures 510mm long and 81mm wide when folded. Its 4-section legs each feature an independent spread, a 3-position angle lock, half-turn twist locks for rapid deployment, and a rubber foot to enhance stability on a wide variety of surfaces.

Together, the three legs can be extended and spread to raise the tripod from a minimum height of 399mm to a maximum height of 1229mm or 1464mm with its push-and-pull, rapid center column fully raised. Cameras, lenses, or sport optics that are compatible with a 1/4-20 mount can be connected to the included quick release plate.

The quick release plate can be attached or removed from the integrated, Arca-type clamp located at the top of the head's ball-and-socket joint by tightening or loosening the clamp's knurled, locking knob. While the top of the quick release plate features a rubberized, non-slip platform, dual retaining screws are provided along its underside. Those retaining screws help prevent the quick release plate and an attached camera from accidentally sliding off when the clamp it is placed on is opened. Additionally, the primary locking knob controls the ability to pan the head 360°.

For added versatility, the tripod's center column is reversible, facilitating low-angle photography where an attached camera is positioned among the tripod's legs instead of above them. A nylon, drawstring bag is provided for storage and transport. Push-and-pull center column with ballast hook for rapid camera, lens, or sport optic positioning.

Can be set for a minimum height of 399mm to a maximum height of 1229mm, or 1464mm with center column fully raised. Center column is reversible, facilitating low-angle photography where an attached camera is positioned among the tripod's legs instead of above them. Legs each feature 4 sections, a 3-position angle lock, half-turn twist locks for rapid deployment, and can be independently spread. Legs can be locked at 21°, 55°, or 80° angles.

Rubber feet help to enhance stability on a wide variety of surfaces. Weighs 1kg, measures 510mm long and 81mm wide when folded. Hex key to adjust tension on leg hinges. Magnesium-alloy ball head with Arca-type quick release clamp.

Aluminum-alloy quick release plate with 1/4-20 mount; rubberized, anti-slip surface; and dual retaining screws that prevent the base plate from accidentally sliding off when the clamp it is placed on is opened. Drawstring bag for storage and transport. Based in South Wales, UK, Camera Centre is a family run business with three generations of knowledge and experience since opening in 1977. We sell a wide range of digital cameras, camcorders, drones, telescopes, binoculars, photographic equipment and accessories online, and through our shops in Cardiff and Newport.

This will ensure that your return is dealt with as quickly as possible. This includes sealed boxes, or sealed accessories and manual/software included in boxes.

The item "Benro Slim Carbon-Fibre Tripod with Ball Head TSL08CN00" is in sale since Thursday, February 21, 2019. This item is in the category "Cameras & Photography\Tripods & Supports\Tripods & Monopods". The seller is "cameracentreuk" and is located in UK.

This item can be shipped worldwide.

  • Brand: Benro
  • MPN: Does Not Apply
  • EAN: 6931747301119


Benro Slim Carbon-Fibre Tripod with Ball Head TSL08CN00    Benro Slim Carbon-Fibre Tripod with Ball Head TSL08CN00