It's also designed with improved fluid technology that allows smooth and judder-free pan and tilt movements. Other key features of the head include a side lock camera plate system and two rosette adapters each with a 3/8-16 accessory port and Manfrotto and ARRI anti-rotation slots. A half ball is included to convert the flat base head to fit the tripod, which has a 100mm bowl and 75mm bowl adapter. With a native flat base, the 608 Nitrotech can also be easily mounted on sliders, jibs, and other gear.
The combined maximum height of the head and tripod is 175 cm and the minimum height is only 49 cm. The tripod is designed with twin spiked feet, allowing it to be used on soft terrain when you remove the spreader. Alternatively, optional Manfrotto 565 rubber shoes can be attached for use on flat surfaces. A padded carrying bag is included for the tripod.
Manfrotto 608 Nitrotech Fluid Video Head. The Manfrotto 608 Nitrotech is a flat base fluid video head designed for the versatility needs of the independent content creator who's engaged in different types of projects.Thanks to its flat base with a 3/8-16 mounting thread, as well as its relatively compact and lightweight design, the head can easily be moved between a compatible tripod and a slider, jib, monopod, and various other gear. One of the key features of the 608 Nitrotech is its Nitrogen gas piston counterbalance mechanism (hence, Nitrotech), which allows continuous counterbalance adjustmentas opposed to stepped or fixedfor the head's full payload range of 0 - 8 kg. Additionally, an upgraded fluid technology significantly improves continuously variable drag performance and enables smooth and judder-free pan and tilt movements. Providing further flexibility, the head's camera plate system features a side lock mechanism that allows for quicker and safer mounting of your camera plate and camera load.
The 608 Nitrotech offers two rosette mounts for attaching the included pan bar on either the left or right side. These rosettes also feature Manfrotto's Easy Link system for mounting accessories via an articulating arm. Each rosette has a 3/8-16 port in the center and both Manfrotto and ARRI anti-rotation slots surrounding the mounting port. The Easy Link system is designed to support Manfrotto articulating arms equipped with anti-rotation pins or those with ARRI locating pins in order to prevent twisting. At the same time, standard articulating arms can also be attached.Other features of the 608 Nitrotech include improved resistance to lower operating temperatures in comparison to previous Nitrotech models and improved ergonomics and materials used for the different knobs. Flat base with 3/8-16 mounting thread allowing for use on tripods, sliders, jibs, monopods, and other support gear. Nitrogen gas piston counterbalance mechanism allowing for continuous counterbalance adjustment for the full payload range of 0 - 8 kg. Upgraded fluid technology enabling smooth and judder-free pan and tilt movements via continuously variable drag performance. Easier, safer side lock camera plate mechanism. Two rosette mounts with a 3/8-16 port and Manfrotto and ARRI anti-rotation slots for attaching the included pan bar and a standard or anti-twist articulating arm. Manfrotto Carbon Fiber Twin Leg Video Tripod Legs with Ground Spreader (100/75mm Bowl). The Manfrotto Carbon Fiber Twin Leg Video Tripod Legs with Ground Spreader is suitable for use on flat, smooth surfaces, and it features carbon fiber tubes that are both strong and lightweight while being corrosion resistant.
The legs incorporate a 100mm half bowl and include a 75mm adapter ring, so you can use them with heads that have either a 100 or 75mm half ball. The legs support up to 20.00 kg, which allows you to mount an appropriately sized fluid head, camera, and accessories without straining the capacity of the legs. With the included ground spreader attached the height of the legs can be adjusted from just 33.5 cm (with Spreader) to 158 cm (with Spreader) high, and the legs collapse to under 69 cm in length for transport and storage. Removing the spreader reveals the dual spiked feet, which are useful for soft surfaces such as gravel, dirt, or sand. The legs weigh a mere 3.27 kg, making them easy to take almost anywhere you can go.The integrated lever locks are strong, durable, and increase the torsional stability of the legs. The included adapter ring is removable and attaches with three mounting screws. Attaching the adapter converts the 100mm bowl into a 75mm bowl. The ground spreader is well suited for use on smooth and flat surfaces, and securely attach to the tripod's dual spiked feet.
Fluid video head with continuous counterbalance system (0-8 Kg). Variable continuous fluid pan & tilt drag system. Flat base mount ideal for various applications. Carbon Fiber twin leg tripod for greater rigidity. 100 to 75mm Adapter Ring.
All stock from Vitec Imaging UK. The item "Manfrotto 608 Nitrotech Fluid Video Head & Carbon Fiber Twin Leg Tripod GS" is in sale since Tuesday, November 3, 2020. This item is in the category "Cameras & Photography\Tripods & Supports\Tripods & Monopods". The seller is "gwcameras" and is located in Swindon.
This item can be shipped to United Kingdom, Australia, United States, Bahrain, Canada, Brazil, Japan, New Zealand, China, Israel, Hong Kong, Indonesia, Malaysia, Mexico, Singapore, South Korea, Taiwan, Thailand, Bangladesh, Bermuda, Bolivia, Barbados, Brunei darussalam, Cayman islands, Ecuador, Egypt, Guadeloupe, French guiana, Jordan, Cambodia, Sri lanka, Macao, Maldives, Martinique, Nicaragua, Oman, Pakistan, Peru, Paraguay, Reunion, Saudi arabia, South africa, United arab emirates, Chile, Bahamas, Colombia, Costa rica, Guatemala, Honduras, Jamaica, Kuwait, Panama, Qatar, Trinidad and tobago, Uruguay, Viet nam.